About Us | Site Map | Government
& Education
| Service and Support | Contact Us | Home

P r o d u c t s

RAID Systems

RAID - Selection
FC RAID - SATA Drives
FC RAID - SAS/SATA Drives
FC RAID - FC Drives
SCSI RAID - SATA Drives
SCSI RAID - SCSI Drives
SAS RAID - SATA Drives
SAS RAID-SAS/SATA Drives
iSCSI RAID - SATA Drives
JBOD/SBOD


SAN
Fibre Channel Switches
Fibre Channel HBAs
SAN Kits
Connectivity Kits


NAS
Windows based NAS
Linux based NAS


D2D Backup Systems
D2D Backup Servers
D2D scenarios


Call:       (949)786 - 4777 Email:     sales@iqss.com

Request Information







 
Search:

RAID Arrays


 

Fibre-Channel host with SATA drives



A424F-D4448   A424F-D4448 
FC-2G to SATA-II 4U/24-bay RAID
  • Full-featured redundant controllers
  • Up to 12TB of storage capacity
  • Accommodates twenty-four (24) SATA-II hard drives
  • Backward compatible with SATA-I drives
  • Independent host connection modules
  • Hardware XOR engine by dedicated ASIC
  • Ideal for SAN and clustered environments
  •   

    A424F-S4448   A424F-S4448 
    FC-2G to SATA-II 4U/24-bay RAID
  • Single controller configuration provides full RAID functionalities
  • Up to 12TB of storage capacity
  • Accommodates twenty-four (24) SATA-II hard drives
  • Backward compatible with SATA-I drives
  • Independent host connection modules
  • Hardware XOR engine by dedicated ASIC
  • Ideal for SAN and clustered environments
  •   

    A316F-D4862   A316F-D4862 
    FC-4G to SATA-II 3U/16-bay RAID
  • Eight (8) FC-4G host ports w/ onboard bypass
  • Redundant, active-active RAID controllers
  • Hardware RAID6 XOR by dedicated ASIC
  • Intelligent load-balancing; internally & multi-path software
  • High-availability, modular enclosure design
  •   

    A316F-S4860   A316F-D4860 
    FC-4G to SATA-II 3U/16-bay RAID
  • Two (2) FC-4G host channels
  • ASIC architecture
  • Supports up to 2GB DDR RAM DIMM module
  • SAN-ready subsystem
  • Complies with RoHS
  •   

    A316F-S4844   A316F-D4844 
    FC-4G to SATA-II 3U/16-bay RAID
  • Latest FC-4G host channels
  • Highest fault tolerance with RAID6 configuration
  • Hardware XOR engine by dedicated ASIC
  • SAN-ready subsystem in an enhanced modular enclosure
  •   

    A316F-D4442   A316F-D4442
    FC-2G to SATA-II 3U/16-bay RAID
  • High performance with ASIC architecture
  • No switch needs to connect up to 4 hosts
  • Higher data path redundancy with Host IO Board
  • Hot swappable BBU
  • Modular enclosure desig
  •   

    A316F-S4442   A316F-S4442
    FC-2G to SATA-II 3U/16-bay RAID
  • High performance with ASIC Architecture
  • Hot swappable BBU
  • Modular enclosure design
  •   

    A212F/A208F-S4844   A212F/A208F-S4844
    FC-4G to SATA-II 2U/8-bay or 12-bay RAID
  • Two FC-4G host channels
  • 2U chassis proving up to 6TB of storage capacity
  • DDR Memory up to 2GB
  • Dual-speed cooling fans to reduce system noise
  •   

    A212F/A208F-S4442   A212F/A208F-S4442
    FC-2G to SATA-II 2U/8-bay or 12-bay RAID
  • High performance with ASIC266 platform
  • Dual-speed fans to reduce noise
  • Enhanced modular enclosure design
  •   





    Fibre-Channel host with SAS/SATA drives



    Q316F-s-D2860   Q316F-S-D2860 
    FC to SAS/SATA 3U/16-bay RAID
  • Dual-active or single controller
  • 4G FC to SAS or SATA-II disk drives
  • Eight (8 - D2860) or four (4-S2860) 4G FC host ports
  • Hardware RAID5 and RAID6 engine by dedicated ASIC
  • Multipathing sotware
  •   

    Q212F-S-D2840   Q212F-S-D2840
    FC to SAS/SATA 2U 12-bay RAID
  • The best I/O performance in RAID-5 for 4 host channels:
          Sequential Reads: 780 MB/sec
          Sequential Writes: 521 MB/sec
  • A leading technology with 2U/12-bay RAID controller
  • Support two (2) FC-4G host channels on each controller
  • Supports up to twelve (12) SAS/SATA disk drives
  • Supports up to 4GB DDR cache memory
  •   








    Fibre-Channel host with Fibre-Channel drives



    F316F-S-D8062   F316F-S-D8062
    4G FC to FC 3U/16-bay RAID
  • 4G Fibre-to-Fibre RAID subsystem
  • Twelve (12) or eight (8) 4G FC SFP ports
  • Hardware RAID6 XOR engine by dedicated ASIC
  • Dual-/single-RAID controller configurations
  • Dedicated SATA 18Gb/s RCC (Redundant Controller Com) channels
  • Sixteen (16) 4Gb/2Gb Fibre Channel disk drives
  • Corresponding F316F-S-D-J8000 loop-switched SBODs
  •   

    F316F-S-DJ8000   F316F-S-D-J8000
    FC-4/2G to FC-4/2G 3U/16-bay SBOD
  • Redundant controlle(F316F-D-J8000)
  • SES enclosure device monitoring
  • 2 SFP ports per controller
  • 4G or 2G transfer rate
  • 2 PSUs; 2 cooling modules
  • Diagnostic LEDs panel
  •   

    F316F-S-D4042   F316F-S-D4042 
    FC-2G to FC-2G 3U/16-bay RAID
  • High performance with ASIC based platform
  • Total twelve 2Gbps Fibre ports; four are host or drive+RCC adjustable
  • Higher data path redundancy with Host IO board and Drive IO board
  • Ideal RAID solution for no single point of failure environments
  • All field replaceable units are hot swappable
  •   

    FF-S-D4042   FF-S-D4042-4/6 
    FC-2G to FC-2G 1U RAID HEAD
  • End-to-end I/O performance achieves 740MB per second (MBps) sequential reads and 502MBps sequential writes in a RAID5 configuration
  • High performance with ASIC based platform
  • Flexible channel modes; Host / Drive / RCC / Drive + RCC adjustable
  • Twelve (12) 2Gps Fibre SFP ports
  • Support up to 4GB DDR Cache Memory
  • Manage  maximum 224 drives by connecting fourteen (14) JBODs
  • Power cable locks prevent power loss caused by cable loosening
  •   








    SCSI host with SATA drives



    A424S-S4842   A424S-S4842 
    SCSI-320 to SATA-II 4U/24-bay RAID
  • High performance with ASIC architecture
  • The most cost effective $/GB with 4U/24-bay plus single controller
  • Two SCSI-320 host channels; host transfer bandwidth up to 640MBps
  •   

    A316S-S4860   A316S-S4860 
    SCSI-320 to SATA-II 3U/16-bay RAID
  • Two SCSI-320 host channels; up to 320MBps per channel
  • RoHS-compliant
  • Accommodates sixteen (16), 3Gbps, SATA-II disk drives
  • ASIC architecture with RAID6 hardware
  • Hot-swappable, life expectancy-aware battery backup
  •   

    A316S-S4860   A316S-S4842
    SCSI-320 to SATA-II 3U/16-bay RAID
  • Ultra-high-density, 3U-profile, 16-bay enclosure
  • Up to 8TB of storage capacity
  • Two (2) SCSI-320 host channels
  • Support up to 2GB DDR RAM
  • Optional, hot-swappable battery backup unit (BBU)
  • Ease of maintenance with host-swappable FRUs
  •   

    A212S/A208S-S4842   A212S/A208S-S4842
    SCSI-320 to SATA-II 2U/8-bay or 12-bay RAID
  • High performance with ASIC architecture
  • 8-bay or 12-bay rackmount enclosures
  •   

    A104S-S4842   A104S-S4842
    SCSI-320 to SATA-II 1U/4-bay
  • SCSI-320 host channel; transfer rate up to 320MBps per channel
  • Single RAID controller providing complete RAID functionality
  • Compact 1U space-saving design
  • Supports up to four (4) SATA-II, 3Gbps disk drives; backward compatible with SATA-I disk drives
  • SATA NCQ (Native Command Queuing) support
  • Real-time event notification by a variety of methods
  •   

    A308S-C4824   A308S-C4824
    SCSI-320 to SATA-II 8-bay Cube RAID
  • High performance with ASIC architecture
  • 8-bay Tower or desktop stackable enclosures
  • SATA-II RAID storage for SOHO with high capacity and lower noise
  • Dual SCSI Channels and Dual PSU
  •   

    A308S-C4822   A08S-C4822
    SCSI-320 to SATA-II 8-bay Cube RAID
  • High performance with ASIC architecture
  • 8-bay Tower or desktop stackable enclosures
  • SATA-II RAID storage for SOHO with high capacity and lower noise
  • Single SCSI Channels and single PSU
  •   








    SCSI host with SCSI drives



    S316S-S8040   S316S-S8040
    SCSI-320 to SCSI-320 3U/16-bay RAID
  • High performance with ASIC architecture
  • Green design with Dual-speed fans
  • Hot swappable optional BBU
  •   

    S212S-S8040   S212S-S8040
    SCSI-320 to SCSI-320 12-bay RAID
  • High performance with ASIC architecture
  • The most space effective with 2U/12-bay
  • Green design with Dual-speed fans
  • Hot swappable optional BBU
  •   








    SAS host with SATA drives



    A212Q-S4260   A212Q-S4260/A208Q-S4260 
    SAS to SATA 2U/12-bay & 2U/8-bay RAID
  • SAS to SATA-II RAID subsystem
  • Two (2) Mini SAS 4x SFF-8088 host ports
  • Hardware RAID5 and RAID6 engine by dedicated ASIC
  • Automated Media Scan
  • 12 or 8 SATA-II disk drives
  • NCQ and S.M.A.R.T. support
  • Performance optimization per no. of I/O streams
  • 64-bit LBA support
  •   








    SAS host with SAS/SATA drives



    Q212Q-S2060   Q212Q-S2060
    SAS to SAS/SATA 2U/12-bay RAID
  • Two (2) SAS 4x wide host ports
  • Hardware RAID6 XOR engine by dedicated ASIC
  • Superior performance with uncomplicated connectivity
  • 12 SAS or SATA-II 3Gbps disk drives
  • Expansion to 60 drives via one (1) 4x wide expansion port
  • Expansion enclosure:Q212Q-S-J2000
  •   

    Q212Q-S-J2000   Q212Q-S-J2000
    SAS/SATA to SAS/SATA 12-bay RAID
  • Twelve (12) disk trays
  • Intermixed SAS/SATA-II 3Gbps
  • Two SAS 4x wide ports per controller
  • Two Power Supply Units
  • Two Cooling modules
  •   








    iSCSI host with SATA drives



    A316i-S4260   A316i-S4260-4
    iSCSI 4x1GbE to SATA-II 3U/16-bay RAID
  • iSCSI Gigabit (Gb) Ethernet to SATA-II RAID subsystem
  • Four GbE host ports plus one (1) Fast Ethernet port for management
  • Multipathing drive
  • r
  • Hardware RAID6 XOR engine by dedicated ASIC
  • Access control over IP, IQN, and mutual CHAP
  •   

    A212i-S4242   A212i-S4242
    iSCSI 1GbE to SATA-II 2U/12-bay RAID
  • High performance with ASIC architecture
  • Easy snap-in storage over standard Ethernet infrastructures
  • Support for iSCSI initiators compliant with IETF iSCSI standard
  • Compatible to Microsoft Windows Server 2003 VDS and MPIO
  • High-availability, modular enclosure design
  •