| |
RAID |
| |
Multiple arrays configurable with dedicated or global hot spares |
| |
RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD |
| |
Online expansion by: |
| |
- Adding new drives
- Copying and replacing drives with drives of larger capacity
|
| |
Automatic background rebuilds |
| |
Configurable stripe size and write policy per array |
| |
Intelligent drive handling: |
| |
- In degraded mode: skips irreparable blocks to continue rebuild
- In normal operation: data-block verification and repair
|
| |
System Components |
| |
Redundant controller configuration provides full RAID functionalities |
| |
- One (1) enhanced 3U enclosure
- Two (2) RAID controller modules
- Two (2) 256MB DDR RAM DIMM modules (pre-installed on the controller modules)
- Two (2) hot-swappable, redundant, dual-fan cooling modules running in high/low speeds
- Sixteen (16) hot-swappable drive trays
- Two (2) front handles
- Two (2) independent battery backup units (BBUs)
- One (1) enclosure configuration card
- Two (2) host connection modules
|
| |
Host Interface |
| |
Two (2) FC-2G host channels with embedded bypass circuit to four (4) FC ports on two (2) hot-swappable, independent host connection modules |
| |
DIP switch settings to change host port attributes |
| |
Auto-negotiate FC-AL, point-to-point, or switched fabric |
| |
Tagged command queuing up to 256 |
| |
Variable stripe size per logical drive |
| |
Optimization setting for random or sequential I/Os |
| |
Drive Interface |
| |
Sixteen (16) hot-swappable 3Gbps SATA-II drive trays that accommodate 1-inch pitch, 3.5-inch SATA-II or SATA-I disk drives |
| |
Automatic bad-sector reassignment |
| |
Dedicated bandwidth to each connected drive |
| |
Management |
| |
Firmware-embedded utility via LCD keypad or RS-232C port |
| |
Host-side SES emulation with pass-through to back-end SES emulation |
| |
VT-100 terminal emulation via RS-232C |
| |
Telnet access via onboard Ethernet port |
| |
10/100 BaseT Ethernet for out-of-band management |
| |
Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity |
| |
Firmware-embedded Java-based RAIDWatch® manager: |
| |
- Cross-platform, remote administration with SSL
- Out-of-band access via Ethernet
- Centralized management to monitor and administer multiple RAID units on one screen
|
| |
Configuration Client for easy access to the configuration utility screen |
| |
SNMP 2.0 MIBs with get and set commands |
| |
SAN Management |
| |
Up to 1024 LUNs (if sufficiently large memory is used with the proper settings) |
| |
Indicators |
| |
Onboard alarm is triggered when one of the following fails: |
| |
- RAID controller module
- Cooling module
- Power supply unit
- Hard drive
- BBU module
- Host connection module
|
| |
Module status LED indicators: |
| |
- Two (2) per drive tray
- Two (2) per cooling module
- One (1) per power supply unit
- One (1) per BBU module
- Three (3) per LCD panel
- Six (6) per RAID controller module
- Two (2) per Ethernet port
|
| |
Module failure alert through I2C bus |
| |
Event notifications sent over email, fax, LAN broadcast, SNMP traps, MSN messenger, ICQ, SMS short messages |
| |
System alerts through Java-based RAIDWatch manager |
| |
|
| |
IOSmart |
| |
IOSmart allows for the flexible configuration of logical drives, logical volumes and logical partitions and ensures instant RAID availability via background logical drive initialization. Fibre loops' load balancing is provided within the subsystem. The firmware's embedded intelligent algorithms, such as Adaptive Write Policy and Guaranteed Latency I/O, improve sequential write performance and ensure the fast and continuous flow of data. |
| |
DrvSmart |
| |
The DrvSmart utility provides an easy way to store data while keeping it safe. One of the main DrvSmart functions, Media Scan, retrieves data from degraded or damaged hard drives and handles low quality drives in both the degraded mode and during the rebuild process. Other DrvSmart features include disk cloning, drive roaming, SMART, transparent resetting of non-responsive hard drives, and RAID parity update tracking and recovery. |
| |
SysSmart |
| |
SysSmart combines enclosure monitoring and firmware management capabilities in order to minimize the chance of down time caused by hardware failures. The Auto data protection mechanisms are developed to ensure data safety. Other SysSmart functions include the event-triggered and the various monitoring utilities and monitoring approaches combined with the powerful RAIDWatch manager. Component status, voltage and temperature readings, and system events are instantly revealed through the manager's graphical interface. |
| Physical/Electrical |
| |
Interfaces |
| |
Four (4) FC ports, each using a short-wavelength adapter |
| |
Two (2) COM ports on each controller module for RS-232C serial port (38400, n, 8, 1) and UPS support |
| |
One (1) 10/100BaseT Ethernet port on each controller module |
| |
Power Supply Module |
| |
Two (2) redundant, hot-swappable power supplies with PFC |
| |
| Input |
100VAC at 10A, 240 VAC at 5A with PFC (auto-switching) |
| |
47 to 63Hz |
| Output |
(Maximum output: 460 Watts) |
| |
+12.0V |
32A max. |
| |
+ 5.0V |
32A max. |
| |
+ 3.3V |
30A max. |
| Dimensions |
248.9(D) x 128(W) x 82.1(H) mm (9.8 x 5 x 3.2 inches) |
|
| |
Cooling Module |
| |
Two (2) redundant, dual-fan cooling modules |
| |
| Maximum Air Flow |
High speed: 31.8 CFM
Low speed: 20.1 CFM |
|
| |
Environmental Specifications |
| |
| Operating Temperature |
0° to 40°C |
| Non-operating Temperature |
-20° to 60°C |
| Relative Humidity |
5 to 95%, non-condensing |
| Altitude |
Operating: 0 to 12,000 ft
Non-operating: 0 to 20,000 ft |
|
| |
Dimensions |
| |
| Chassis without handles: |
445(W) x 130(H) x 488.2(D) mm
(17.5 x 5.1 x 19.2 inches) |
| Chassis with handles: |
482.6(W) x 131(H) x 504.3(D) mm
(19 x 5.2 x 19.9 inches) |
| Package: |
423(H) x 567(W) x 772(D) mm
(16.7 x 22.3 x 30.4 inches) |
|
| |
System Weight |
| |
Net weight: 28.5kg (62.7 pounds)
Gross weight: 30.5kg (67.1 pounds) |
